USB3 MicroCoax Cables
Description
USB 3.0 microcoax cable assembly carrying both USB 2.0 data and SuperSpeed signals. Choose the USB connector to match the host or device port. The other end terminates in an 8-position JST-GH connector.
Options
The USB connector choice identifies the USB end; the other end is the same 8-position JST-GH connector in every configuration.
| USB connector option | Photo | End type | Mates with | Available cable lengths |
|---|---|---|---|---|
| USB3 Micro-B Male |  | Male plug | USB Micro-B receptacle | 150 mm, 300 mm, 600 mm |
| USB3 Type-C Male |  | Male plug | USB Type-C receptacle | 150 mm, 300 mm, 600 mm |
| USB3 Type-C Female |  | Female receptacle | USB Type-C plug | 150 mm, 300 mm, 600 mm |
| USB3 Type-A Male |  | Male plug | USB Type-A receptacle | 150 mm, 300 mm, 600 mm |
| USB3 Type-A Female |  | Female receptacle | USB Type-A plug | 150 mm, 300 mm, 600 mm |
Pinout
The JST-GH side uses an 8-position connector. Pin 1 is identified in the connector diagram. USB 2.0 data uses D+ and D-; the TX and RX differential pairs carry USB SuperSpeed data.
| JST-GH pin | Signal |
|---|---|
| 1 | VBUS |
| 2 | D- (USB 2.0 data) |
| 3 | D+ (USB 2.0 data) |
| 4 | TX_N (SuperSpeed transmit, negative) |
| 5 | TX_P (SuperSpeed transmit, positive) |
| 6 | RX_N (SuperSpeed receive, negative) |
| 7 | RX_P (SuperSpeed receive, positive) |
| 8 | GND |